Stainless Steel Cutback® Solution

How to use the Euro-Cloth on Stainless Steel with the CUTBACK® SOLUTION

IMPORTANT: to be used only for the initial clean. Use only on natural stainless steel. Do not use on Easy Clean or mark Resistant stainless steel. Further Cleaning needs only a damp Euro-Cloth

Cutback® solution is designed to take off oils and sprays previously used on the stainless steel surface. Use also on stubborn marks that cannot be removed by the Euro-Cloth alone.



  • Step 1
    STEP ONE

    Spray Cutback® Solution generously and evenly over area. Immediately wipe with damp Euro-Cloth. Do not let solution run outside cleaning area. Do not leave on surface without wiping with the Euro-Cloth.

  • Step 2
    STEP TWO

    Ensure Cutback® Solution is wiped evenly over the surface, then allow Cutback® Solution to dry smeary.

  • Step 3
    STEP THREE

    Rinse Cutback® Solution out of the Euro-Cloth.

  • Step 4
    STEP FOUR

    Now wipe surface again with damp Euro-Cloth. Repeat the rinse and wipe steps until all Cutback® Solution is wiped off the surface. Allow surface to dry by evaporation.